n czernysz:
Reinstalling Honjo mudguards, I didn't do the original instal. Shortening eye bolts by 5mm so they are flush. Before/ after. The stays weren't bent on installation. I'm not sure if I can bend them yet, may become to short.
n czernysz:
Shorten this sucker also. Need to get a fender washer and some leather the right thickness.
n czernysz:
Shorten this sucker also. Need to get a fender washer and some leather the right thickness.
n czernysz:
Shorten this sucker also. Need to get a fender washer and some leather the right thickness.
n czernysz:
Leather washer fabrication from a value village belt. Actually a little thicker than I want, however perfect for my forks cause I recess the mounting bit a little. The o.d needs to be reduced for that application however o.d. Is good for this bike.
n czernysz:
Leather thinning.
n czernysz:
Leather under crown fender washer making tool I made today, from scrap tubing, a washer and a cheap socket. Works o.k.
n czernysz:
Leather under crown fender washer making tool I made today, from scrap tubing, a washer and a cheap socket. Works o.k.
n czernysz:
So I made another one, it's finished, out of stainless, it's better, and I was at the hardware store anyways. Before/after.
n czernysz:
So I made another one, it's finished, out of stainless, it's better, and I was at the hardware store anyways. Before/ after.
n czernysz:
So I made another one, it's finished, out of stainless, it's better, and I was at the hardware store anyways. Before/ after.
n czernysz:
So I made another one, it's finished, out of stainless, it's better, and I was at the hardware store anyways. Before/after.
n czernysz:
Special washer, before and after, still need to reduce the o.d. 6mm centre hole. Belt sander and a wine cork were the tools used. Flat one side, convex on the other.
n czernysz:
Special washer, before and after, still need to reduce the o.d. 6mm centre hole. Belt sander and a wine cork were the tools used. Flat on one side, cover on the other.
n czernysz:
Special washer, before and after, still need to reduce the o.d. 6mm centre hole. Belt sander and a wine cork were the tools used. Flat on one side, convex on the other.
n czernysz:
Picked up this trick from Velolumino or A.T. just last week. All this effort just for a few more mm of clearance. The original daruma bolt wasn't cut at all. Cut with a standard nut, better, this setup best. Thanks Mr. A.T.
n czernysz:
Picked up this trick from Velolumino or A.T. just last week. All this effort just for a few more mm of clearance. The original daruma bolt wasn't cut at all. Cut with a standard nut, better, this setup best. Thanks Mr. A.T.
n czernysz:
Picked up this trick from Velolumino or A.T. just last week. All this effort just for a few more mm of clearance. The original daruma bolt wasn't cut at all. Cut with a standard nut, better, this setup best. Thanks Mr. A.T.
n czernysz:
Picked up this trick from Velolumino or A.T. just last week. All this effort just for a few more mm of clearance. The original daruma bolt wasn't cut at all. Cut with a standard nut, better, this setup best. Thanks Mr. A.T.
n czernysz:
Fender, I call them mudguards when I'm in Bicycle Specialties, reshaped with the help of a Penn 3. Probably needs a bit more tweaking.
n czernysz:
Fender, I call them mudguards when I'm in Bicycle Specialties, reshaped with the help of a Penn 3. Probably needs a bit more tweaking.
n czernysz:
Fender, I call them mudguards when I'm in Bicycle Specialties, reshaped with the help of a Penn 3. Probably needs a bit more tweaking.
n czernysz:
Fun on Canada day.
n czernysz:
Fun on Canada day.
n czernysz:
Fun on Canada day.
n czernysz:
Fun on Canada day.
n czernysz:
Fun on Canada day.
n czernysz:
I've posted some pictures of this frame before, it was finished to this state years a few years ago. Finnish it or buy tools, can't have both, so so it remains.
n czernysz:
I've posted some pictures of this frame before, it was finished to this state years a few years ago. Finish it or buy tools, can't have both, so so it remains.
n czernysz:
I've posted some pictures of this frame before, it was finished to this state years a few years ago. Finnish it or buy tools, can't have both, so so it remains.
