©
zenwebb: Cut down 4x4 sheets
©
zenwebb: Use string and screw to make large circle
©
zenwebb: Mark out circle to cut
©
zenwebb: Prepare to cut circle
©
zenwebb: Cut circle with jigsaw
©
zenwebb: Cut remaining circles (2)
©
zenwebb: Cut remaining circles (1)
©
zenwebb: Apply wood glue and laminate
©
zenwebb: Add weights or clamps to laminate
©
zenwebb: Test fit the middle and bottom discs
©
zenwebb: All layers glued and clamped
©
zenwebb: Tools to smooth edges
©
zenwebb: Raw edges, no sanding (2)
©
zenwebb: Raw edges, no sanding (1)
©
zenwebb: After sanding
©
zenwebb: Test fit the rope
©
zenwebb: Mark center and flange outline
©
zenwebb: Drill countersink hole for excess nipple
©
zenwebb: Install bottom flange
©
zenwebb: Bottom flange installed
©
zenwebb: Cut down nipples
©
zenwebb: Nipple in bottom flange
©
zenwebb: Pivot flange installed
©
zenwebb: Nipple in pivot flange
©
zenwebb: Install caster
©
zenwebb: All casters installed
©
zenwebb: Finished turntable
©
zenwebb: Rope
©
zenwebb: Finished turntable with rope
©
zenwebb: Finished turntable - profile