TimeScience:
Ghetto fabulous DC-10 battery coupler
TimeScience:
Drill or cut notches in each corner to match the real battery
TimeScience:
Cutting the notches
TimeScience:
Making a NB-5L coupler
TimeScience:
Draw the shape of the battery on the wood
TimeScience:
Cut out the wood with a scroll saw or by hand
TimeScience:
The size needs to match exactly
TimeScience:
Cut the corner notches out with a knife
TimeScience:
Mark where the wires will go
TimeScience:
Check that the battery fits easily in the camera
TimeScience:
Mark where the wires should come out
TimeScience:
Battery with wire hole marked
TimeScience:
Cut a notch out of the top of the battery on the side oopsite the latch.
TimeScience:
The holes you drilled should come out the notch
TimeScience:
Clamp the wood so it doesn't split and then drill the holes out
TimeScience:
Bottom holes drilled out
TimeScience:
Mark (+) & (-) on the fake battery
TimeScience:
After testing, glue the wires in place
TimeScience:
Put a bit of solder on the end of each wire
TimeScience:
Final battery with the wires glued in place
TimeScience:
The final system wired and running