Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've designed and printed a pinhole body to use with my 6x7 Graphic 23 rollfilm holder. I've used the same base as the 6x7 snapshot body but drawn a unique body with magnetic shutter. It will use a 0.25mm pinhole for an 85 degree FOV.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
I've just skinned the main body and mounted the 0.25mm pinhole plate and embedded magnets for the shutter. I need to cut some skin pieces for each end then it's finished.
Steve Lloyd:
3D Printed Pinhole
Steve Lloyd:
3D Printed Pinhole
Steve Lloyd:
3D Printed 6x7 Pinhole - Fuji Pro160S
Steve Lloyd:
3D Printed 6x7 Pinhole - Fuji Pro160S
Steve Lloyd:
3D Printed 6x7 Pinhole - Fuji Pro160S
Steve Lloyd:
3D Printed 6x7 Pinhole - Fuji Pro160S