Steve Lloyd:
3D Render Drawn in Sketchup
Steve Lloyd:
3D Render Drawn in Sketchup
Steve Lloyd:
3D Render Drawn in Sketchup
Steve Lloyd:
Four neodymium ring magnets embedded into either end of the lens board base and each side on the main camera body. These hold the lens board in whichever position it is left in.
Steve Lloyd:
Four neodymium ring magnets embedded into either end of the lens board base and each side on the main camera body. These hold the lens board in whichever position it is left in.
Steve Lloyd:
Four neodymium ring magnets embedded into either end of the lens board base and each side on the main camera body. These hold the lens board in whichever position it is left in.
Steve Lloyd:
Four neodymium ring magnets embedded into either end of the lens board base and each side on the main camera body. These hold the lens board in whichever position it is left in.
Steve Lloyd:
Four neodymium ring magnets embedded into either end of the lens board base and each side on the main camera body. These hold the lens board in whichever position it is left in.
Steve Lloyd:
Lens movement
Steve Lloyd:
Lens movement
Steve Lloyd:
Lens movement
Steve Lloyd:
Half of main lens board in place.
Steve Lloyd:
GGS in landscape orientation
Steve Lloyd:
GGS in portrait orientation
Steve Lloyd:
Rear face of GGS
Steve Lloyd:
Front face of GGS holder with brackets to clip into rear of body.
Steve Lloyd:
6x9 Portrait orientation
Steve Lloyd:
6x9 Landscape orientation
Steve Lloyd:
Top View with 6x9 roll film hold run landscape orientation
Steve Lloyd:
DSC09108
Steve Lloyd:
First print of main body
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
Steve Lloyd:
Bellows made from card stock. Appear to be flexible enough but will see when the camera is assembled.
