Rock The Bike:
Stompodium foam form and its subwoofer.
Rock The Bike:
Used clay to fill a crack, then taped it.
Rock The Bike:
Used a shopping bag to get a smooth finish on Stompodium.
Rock The Bike:
Releasing Stompodium from its mold
Rock The Bike:
Star Ribs for the flywheel side of the Stompodium
Rock The Bike:
Stompodium: Forming a guard for the flywheel
Rock The Bike:
Internal bracing and motor mount of Stompodium
Rock The Bike:
Stompodium almost ready!
Rock The Bike:
Stompodium one-way bearing installed.
Rock The Bike:
Stompodium flywheel, guard, and pedal
Rock The Bike:
Chopped up a monopod
Rock The Bike:
Extended protuberance
Rock The Bike:
Telescoping handle
Rock The Bike:
The camping table has a piece of glass across it. The reason: it's known to be flat. So will the Stompodium's bottom.
Rock The Bike:
Flywheel on top, foldable cardboard design.
Rock The Bike:
Flywheel on the top.
Rock The Bike:
Folding Stompodium design in upper right!
Rock The Bike:
One way bearing sketch #1
Rock The Bike:
A big speaker on one side, a flywheel on the other.
Rock The Bike:
Starting to play with rounded forms.
Rock The Bike:
Note the upper right: Stompodium. First time in writing, on the page that shows the current design with its trademark notch.
Rock The Bike:
One way bearing sketch #3.
Rock The Bike:
First drawing that shows an elevated section for the Cardboard Box
Rock The Bike:
First drawing that shows a seperate gear increaser pulley off to the right
Rock The Bike:
Generator mount, side view.
Rock The Bike:
After getting mobbed by kids at my baby niece's 1 year birthday party, I added a guard for the flywheel.
Rock The Bike:
One-way bearing / pulley stack.
Rock The Bike:
More bearing sketches. Note 5-hour Energy bottle top, which made it into the first successful prototype.
Rock The Bike:
Stompodium: Very crude demonstration of stomping technique.
Rock The Bike:
One-way bearing
