JD and Beastlet:
Powerlet connector components
JD and Beastlet:
Back of shell - metal thread
JD and Beastlet:
QL 12V-24V wireless charger - boxed
JD and Beastlet:
QL 12V-24V wireless charger - unboxed
JD and Beastlet:
QL mirror mount - boxed
JD and Beastlet:
QL mirror mount - unboxed
JD and Beastlet:
QL vibration dampener - boxed
JD and Beastlet:
QL vibration dampener - unboxed
JD and Beastlet:
Mirror mount open
JD and Beastlet:
Loose fit on the mirror
JD and Beastlet:
That's what the shims are for!
JD and Beastlet:
And this one is JUST right
JD and Beastlet:
Mirror mount shimmed and clamped
JD and Beastlet:
Prepping for soldering
JD and Beastlet:
Flux paste
JD and Beastlet:
Flux in the negative terminal
JD and Beastlet:
Solder in the negative terminal - 01
JD and Beastlet:
Solder in the negative terminal - 02
JD and Beastlet:
Heating the negative terminal
JD and Beastlet:
Negative terminal soldered in place
JD and Beastlet:
Flux in the positive terminal
JD and Beastlet:
Piece of solder for the positive terminal
JD and Beastlet:
Solder in the positive terminal
JD and Beastlet:
Positive terminal soldered in place*
JD and Beastlet:
Cutting the grommet
JD and Beastlet:
Grommet cut
JD and Beastlet:
Forgot the heat shrink too!
JD and Beastlet:
Front shell and power connector
JD and Beastlet:
Front shell from back
JD and Beastlet:
Adding grommet