JD and Beastlet:
Footpeg spring
JD and Beastlet:
Footpeg pin and circlip
JD and Beastlet:
Circlip out
JD and Beastlet:
Footpeg off, with pin and circlip
JD and Beastlet:
Shift mechanism bolt*
JD and Beastlet:
Removing the shift linkage pich bolt
JD and Beastlet:
Pinch bolt back in place
JD and Beastlet:
Three bolts for the footpeg / shifter assembly
JD and Beastlet:
Removing with a 6mm hex wrench
JD and Beastlet:
Bolts and assembly on bench
JD and Beastlet:
Footpeg socket bolt
JD and Beastlet:
Assembly clamped for bolt removal
JD and Beastlet:
Ratchet and 8mm drive socket
JD and Beastlet:
8mm socket up close
JD and Beastlet:
Shifter linkage separated from footpeg socket
JD and Beastlet:
Mount plate - front - before
JD and Beastlet:
Mount plate - back - before
JD and Beastlet:
Mount plate - front - after
JD and Beastlet:
Mount plate - back - after
JD and Beastlet:
All clean
JD and Beastlet:
Various possible shim solutions
JD and Beastlet:
Putting a wave in this washer
JD and Beastlet:
Waved
JD and Beastlet:
Went with a fiber washer instead
JD and Beastlet:
A little grease on the fiber washer
JD and Beastlet:
Mounting threads cleaned up
JD and Beastlet:
Grease in the footpeg collar
JD and Beastlet:
Grease on the footpeg pin
JD and Beastlet:
Everything back in place
JD and Beastlet:
Slop removed