JD and Beastlet:
Fender mount bolt
JD and Beastlet:
Removing the fender mount bolts from the lower brace
JD and Beastlet:
Broken deer whistle mount
JD and Beastlet:
Lower brace removed - top
JD and Beastlet:
Lower brace removed - bottom
JD and Beastlet:
Mount epoxied - braced with clamp
JD and Beastlet:
Fender cleaned - top
JD and Beastlet:
Fender cleaned - bottom
JD and Beastlet:
Fender back plate
JD and Beastlet:
Fender back plate - in place
JD and Beastlet:
Cleaning the fender back plate
JD and Beastlet:
Silicone*
JD and Beastlet:
Fender back plate traced
JD and Beastlet:
Silicone applied
JD and Beastlet:
Back plate bolted on
JD and Beastlet:
24h later, silicone has cured
JD and Beastlet:
Deer whistle mount glue cured
JD and Beastlet:
Lower plate mount bolts
JD and Beastlet:
Part washer
JD and Beastlet:
A good shake
JD and Beastlet:
Bolts are pretty clean
JD and Beastlet:
Fender mounting bolt - a little gummy in the lower threads
JD and Beastlet:
Fender mounting bolt - chucked in the drill
JD and Beastlet:
Fender mounting bolt - cleaned with the wire wheel
JD and Beastlet:
Anti-seize
JD and Beastlet:
Anti-seize on a lower plate mount bolt
JD and Beastlet:
Anti seize on a bit of wire
JD and Beastlet:
Anti seize in the fender back plate nuts