JD and Beastlet:
Adapter threads
JD and Beastlet:
Old 2-blade spinner thread
JD and Beastlet:
Apparently 3/8-16 and M10.0 x 1.5 are compatible!
JD and Beastlet:
Bolt face reduction math
JD and Beastlet:
Faces marked
JD and Beastlet:
At the grinder
JD and Beastlet:
Height set
JD and Beastlet:
Grinding the faces
JD and Beastlet:
The nut is in the socket
JD and Beastlet:
$5 for 10 washers!
JD and Beastlet:
Washers are too big around
JD and Beastlet:
Washers pressed onto tapered rod - 01
JD and Beastlet:
Washers pressed onto tapered rod - 02
JD and Beastlet:
Rod chucked in drill
JD and Beastlet:
Grinding parallel to the edges
JD and Beastlet:
Tapping the washers on
JD and Beastlet:
Tapping the washers off
JD and Beastlet:
Filing down the burrs
JD and Beastlet:
Washers fit
JD and Beastlet:
Washers in
JD and Beastlet:
Loctite on, nut on
JD and Beastlet:
NGK CM-6 - 01
JD and Beastlet:
NGK CM-6 - 02
JD and Beastlet:
Single bolt prop adapter - loctite on the bolts
JD and Beastlet:
Cleaning the bolts for loctite
JD and Beastlet:
Single bolt prop adapter installation complete