JD and Beastlet:
Hobbistar Cowl for DLE 20 - plans
JD and Beastlet:
Parts
JD and Beastlet:
Side template
JD and Beastlet:
Top template
JD and Beastlet:
Squaring up the form blocks
JD and Beastlet:
Blocks clamped
JD and Beastlet:
Use top...
JD and Beastlet:
Use bottom...
JD and Beastlet:
Top of one bottle, bottom of another
JD and Beastlet:
Form block glued up
JD and Beastlet:
Side profile
JD and Beastlet:
Top profile
JD and Beastlet:
Front sanded smooth
JD and Beastlet:
Marking the side cut
JD and Beastlet:
Trimming the side
JD and Beastlet:
Side trimmed
JD and Beastlet:
Side profile taped on
JD and Beastlet:
Side profile cut
JD and Beastlet:
A little too thin - need to fatten it up
JD and Beastlet:
Glue on plate
JD and Beastlet:
Glued and clamped
JD and Beastlet:
Plywood plate thickener glued on
JD and Beastlet:
Plate shaped
JD and Beastlet:
Gaps filled
JD and Beastlet:
Router table
JD and Beastlet:
1-4 in roundover bit
JD and Beastlet:
Test piece
JD and Beastlet:
Balsa filler (oops, oversanding)
JD and Beastlet:
Weighing down the glue up
JD and Beastlet:
Cowl form on rod.jpg
