osiristhe:
DIY Felt Banner
osiristhe:
0. Supplies
osiristhe:
1. Use 45-degree lines on cutting mat to place masking tape at 45 degree angle of felt corner.
osiristhe:
2. Flip the cutting mat around and place another piece of tape at 45-degrees from the corner.
osiristhe:
3. Use rotary cutter & acrlyic guide to cut along the masking tape line.
osiristhe:
4. Repeat 45-degree cut along other masking tape.
osiristhe:
5. Remove tape and excess felt.
osiristhe:
6. Trim felt to ideal height + 1.5".
osiristhe:
7. Fold over top 1.5" and sew across.
osiristhe:
8. Stick a dowel through the hole created in previous step. Add pins/whatever.
osiristhe:
Completed Felt Banner Enamel Pin Display