greg_guarino:
The Beginning: The Measurements
greg_guarino:
Temporarily Fastening the Uprights to Each Other
greg_guarino:
Laying out the Dadoes.
greg_guarino:
Routing the Dadoes
greg_guarino:
Router with pattern bit
greg_guarino:
The Uprights with Dadoes
greg_guarino:
1/2" Rabbeting Bit
greg_guarino:
The Uprights with Rabbets for the Rear Panel
greg_guarino:
First Dry Fit
greg_guarino:
Trimming the shelves to length
greg_guarino:
Applying Edge Veneer
greg_guarino:
Applying edge veneer to the shelves
greg_guarino:
Shelves with edge veneer, before trimming
greg_guarino:
Trimming the edge veneer.
greg_guarino:
Easing the edges
greg_guarino:
Sanding the Edges
greg_guarino:
Nails to support shelves for finishing
greg_guarino:
Shelves laid out for finishing
greg_guarino:
Prefinishing in progress
greg_guarino:
Trimming the Uprights to Length
greg_guarino:
Setting Up the First Upright Plumb
greg_guarino:
Clamping Square
greg_guarino:
The Glue-Up: 4 Shelves in
greg_guarino:
The Glue-Up: Lining Up the 2nd Upright
greg_guarino:
Wedges and a long piece of scrap to apply pressure to the bottom of each joint.
greg_guarino:
The Glue-Up (or Foosball?)
greg_guarino:
Cutting and Fitting the Trim
greg_guarino:
Cutting and Fitting the Trim
greg_guarino:
Fitting the Trim
greg_guarino:
Cutting and Fitting the Trim
