greg_guarino:
Gluing an Oak 1x2 "Border" on the Desk Top
greg_guarino:
Clamps
greg_guarino:
Desktop Project
greg_guarino:
Planing Oak "Border" Even With Main Desk Surface
greg_guarino:
Handscrew and Stop Block
greg_guarino:
Ripping Oak for Rails
greg_guarino:
Cutting Four Stiles
greg_guarino:
Cleaning Up Edges
greg_guarino:
Support Block to Hold Longer Pieces
greg_guarino:
Cleaning Up Edges
greg_guarino:
Routing a Test Piece
greg_guarino:
Sanding Rails & Stiles
greg_guarino:
Cutting Splines
greg_guarino:
Cut Splines
greg_guarino:
First Dry-Fit
greg_guarino:
Spline Joint Detail
greg_guarino:
Dry Fit With Panel
greg_guarino:
Shaving Down Splines
greg_guarino:
Final Prep Before Gluing
greg_guarino:
Panel Door Glue Up
greg_guarino:
Trimming Splines
greg_guarino:
Sanding Splines Flush
greg_guarino:
Last Sanding Before Finishing: 320 Grit
greg_guarino:
Sanding Corners
greg_guarino:
Applying Waterlox
greg_guarino:
Getting into the corners
greg_guarino:
Hanging Doors up to Dry
greg_guarino:
Light Sanding Before Third Coat
greg_guarino:
Applying Third Coat of Finish
greg_guarino:
Scoring Edge Banding Before Sawing
