fritz_da_kat:
Remove "lollipop" bracket that attaches control arm to body
fritz_da_kat:
Detach the sway bar supporting bracket from the subframe
fritz_da_kat:
Support the engine
fritz_da_kat:
Remove the protecting oil pan cover
fritz_da_kat:
Under the engine
fritz_da_kat:
Drain oil from engine
fritz_da_kat:
Detach steering rach from subframe
fritz_da_kat:
Remove nuts that attach the motor mounts to the subframe
fritz_da_kat:
Remove subframe bolts
fritz_da_kat:
Drop the subframe. Keep it suspended, it is still attached to the control arms.
fritz_da_kat:
Detach the control arm center ball joint from the subframe
fritz_da_kat:
The subframe, free at last
fritz_da_kat:
No subframe
fritz_da_kat:
Support the control arms
fritz_da_kat:
Disconnect the oil sensor connector
fritz_da_kat:
Remove the bell housing cover plate
fritz_da_kat:
Remove reverse Torx bolts
fritz_da_kat:
Bellhousing cover plate and stopper
fritz_da_kat:
Remove the 25 10mm retaining bolts that hold the oil pan to the engine
fritz_da_kat:
More bolts
fritz_da_kat:
Oil pan with gasket remnants.
fritz_da_kat:
With the oil pump removed
fritz_da_kat:
Oil pump in the collector pan
fritz_da_kat:
Clean and shiny
fritz_da_kat:
New vs. Old
fritz_da_kat:
I need a break, a shower, and a shave
fritz_da_kat:
Passenger's side motor mount
fritz_da_kat:
Engine support bracket with motor mount removed
fritz_da_kat:
Driver's side engine mount bracket, with the mount removed.
fritz_da_kat:
Broken motor mount