David P Best:
The basic design
David P Best:
Layout of the table top.
David P Best:
Using the "Flatness" of the sliding table.
David P Best:
Gluing up the top
David P Best:
Closeup of the rip / top sandwich
David P Best:
Clamping the rim end pieces to the sides
David P Best:
Closeup of clamping the rip end pieces to the sides
David P Best:
Applying the 4mm European Beech veneer strips
David P Best:
Preparing the legs for adjustable foot-pads.
David P Best:
Preparing the legs for adjustable foot-pads.
David P Best:
After drilling for the leveling feet
David P Best:
T-Nut inserted to receive the leveling pads
David P Best:
Leveling pad in place - checking fit
David P Best:
Leveling pad in place - checking fit
David P Best:
Setup for mortising the legs for top attachment
David P Best:
Legs attach to the rim with two 14mm Dominos
David P Best:
Legs attach to the rim with two 14mm Dominos
David P Best:
Claming the four legs to the rim/top
David P Best:
Claming the four legs to the rim/top
David P Best:
Checking the leg to rim alignment
David P Best:
Checking for leg square
David P Best:
Finished table - filled and sanded to 400 grit
David P Best:
Finished table - filled and sanded to 400 grit
David P Best:
Finished table - filled and sanded to 400 grit
David P Best:
Leaving the shop for the finisher
David P Best:
Leaving the shop for the finisher
David P Best:
Leaving the shop for the finisher