David P Best:
Profil 45 Shaper Hood with Aigner Fence Plates - tilted 45-degrees
David P Best:
2004 to 2012 Profil 45 Shaper Hood
David P Best:
2012 and Beyond Profil 45 Shaper Hood
David P Best:
Aigner BowmouldMaster Shaper Hood
David P Best:
Cutter stack capacity is 6" or 150mm on 30mm spindle.
David P Best:
Dimensioned Drawing of Spindle Cavity - 2004 to 2012 Machines
David P Best:
This is the updated cavity on the post-2012 vintage Profil 45 shapers
David P Best:
Dimensioned Drawing of Spindle Cavity - 2012+ Era Machines
David P Best:
Updated max diameter for revised Felder Profil 45 - 2012 and later vintage machines
David P Best:
The spindle cavity as seen from within the machine
David P Best:
Freeborn 1-3/4" passage door set
David P Best:
Same Freeborn passage door set stacked.
David P Best:
Same Freeborn set lowered into machine
David P Best:
220mm diameter rebater cutter - restricted lowering into cavity - see drawing for details.
David P Best:
190mm raised panel cutter lowers just far enough
David P Best:
Same raised panel cutter - Whitehill from the UK
David P Best:
100mm spiral rebate cutter goes full depth
David P Best:
100mm diameter template routing cutter
David P Best:
180mm panel raiser cutter - impinges on dust pickup brackets on both sides.
David P Best:
150mm diameter rebate cutter
David P Best:
Complex stack - see description
David P Best:
Same Stack side view
David P Best:
Same stack as seen from inside the machine chassis fully lowered.
David P Best:
Spindle angled to 45-degrees - Pre-2012 machines
David P Best:
Shaper tooling size limits at 45-degrees
David P Best:
Stacked cutters at 45-degrees