David P Best:
Concept drawing for client approval
David P Best:
Shop construction drawing for the kitchen island
David P Best:
The required panels for the project after delivery
David P Best:
Hand selected Pennsylvania cherry 4/4 rough
David P Best:
Edging the Applyply for the drawer cab with cherry
David P Best:
Solid edging clamped to the cherry plywood
David P Best:
Building the drawer cabinet after edging and cutting to size.
David P Best:
Completed rim of the drawer cabinet
David P Best:
Detail showing cherry edging
David P Best:
Applying sealer and one coat of BLO, on cherry edging
David P Best:
5mm Vix-bit used to drill for the Blum undermount slides
David P Best:
Drawer slide installation.
David P Best:
Glass door cherry plywood cabinet rim under construction
David P Best:
Completed glass door cabinet box
David P Best:
Applying the lighting valance
David P Best:
LED light strip in position behind the valance
David P Best:
Cutout in the end for the 24V power to LED
David P Best:
Proposed frame cope/stick profile and raised panel detail
David P Best:
Cutting some of the door stile material on the Kappa 400
David P Best:
This is the Freeborn cutterset for the cope/stick profiles
David P Best:
Video - Machining the stick profile - climb cutting
David P Best:
Completed cope and stick profiles
David P Best:
Checking alignment at the joints
David P Best:
Happy with this miter where cope and stick meet
David P Best:
Setup for raised panel profile
David P Best:
One of two test panels for client approval
David P Best:
Second test panel with different raised panel profile
David P Best:
After minor sanding and BLO - these are samples for profile selection only.
David P Best:
Machining the raised panels for the two end-caps.
David P Best:
Another view - cut the end-grain first, then the long grain
