chrisginottawa:
Version 1 in maple, 3 pieces of maple and 6 screws.
chrisginottawa:
Version 1, rear view.
chrisginottawa:
Hand planed finish is nicer than a fuzzy sanded finish.
chrisginottawa:
How the wall mount fits into the Brompton bag.
chrisginottawa:
2 long stainless screws secure the 2 maple pieces to the wall stud.
chrisginottawa:
Vers. 2 side view. The rear cedar board simulates the 1/2” drywall.
chrisginottawa:
Lacewood gossamer shavings with an high angle Chinese plane.
chrisginottawa:
Drilling a 1” diameter hole in 2 pieces in one go.
chrisginottawa:
White ash, figured maple and Australian lacewood bee bag wall mounts.
chrisginottawa:
3 wall mounts (lacewood/maple/lacewood) mounted on a maple board for my mud room.
chrisginottawa:
3 bag board mounted on rear wall of closet. No more tripping over bags.
chrisginottawa:
Template with 2 lacewood fronts
chrisginottawa:
Drilling the 5/8” ‘hook’ hole
chrisginottawa:
Very handy vice jig to support the router for cutting rads on work pieces.
chrisginottawa:
Different figured wood faceplates
chrisginottawa:
Different figured wood faceplates
chrisginottawa:
Various figured wood face plates
chrisginottawa:
Brompton bag wall mounts in various figured woods
chrisginottawa:
Wall mount components including Torx T25 screws.
chrisginottawa:
Darn! 3 ridges in the newer bag dock. Poor mold design/maintenance?
chrisginottawa:
Building a jig to cut clearance slots for 3 ridges in the bag dock.
chrisginottawa:
Slot jig with 2 spacers (8.5mm) on table saw. It works!
chrisginottawa:
Why not… wall hanger for a traditional bicycle rack pannier
chrisginottawa:
Glenn’s bag mount installed on the wall!
chrisginottawa:
Glenn’s wall bag mount with borough roll top bag and helmet.
chrisginottawa:
Australian lacewood and wood
chrisginottawa:
Cherry and tiger strip maple wood
chrisginottawa:
Walnut and white ash wood