chrisginottawa:
Cocobolo edge burnishing tool with 0.125" shaft
chrisginottawa:
Oak strip sanding block, tightening wedge.
chrisginottawa:
Homemade oak strip sanding block. Uses a strip of sandpaper cut from a standard sheet.
chrisginottawa:
Cocobolo edge burnishing tool with 0.125" shaft. Slots cut to match leather thickness. Drill epoxied into wood.
chrisginottawa:
Homemade oak strip sanding block
chrisginottawa:
Leather guards projects
chrisginottawa:
Using my arbor press to stamp lead type into leather sheath
chrisginottawa:
Pine and cherry 3/4” belt cutter
chrisginottawa:
Pine Stitching Pony
chrisginottawa:
Pine Stitching Pony with rare earth magnet for needles.
chrisginottawa:
Pine stitching pony with projection to prevent thread snagging on knob.
chrisginottawa:
3/4” strap cutter
chrisginottawa:
Spade drill ground to cut bottom fillets
chrisginottawa:
Spade drill ground to cut bottom fillets
chrisginottawa:
Cocobolo burnishing tool #3
chrisginottawa:
Cocobolo burnishing tool #3
chrisginottawa:
Leather burnisher #4 turning on lathe
chrisginottawa:
Burnisher blank on lathe.
chrisginottawa:
Attempt to center the 0.125" pin in burnisher with epoxy.
chrisginottawa:
Burnisher #4
chrisginottawa:
11” wedge strip sander
chrisginottawa:
Tapered 11” wedge strip sander
chrisginottawa:
11” strip sanders for leather edges
chrisginottawa:
11” wedge strip sanders
chrisginottawa:
Stitch polygon template
chrisginottawa:
Stitch polygon template
chrisginottawa:
Stitch polygon template
chrisginottawa:
Stitch polygon template
chrisginottawa:
More stitching with template
chrisginottawa:
Hard maple former inserted in belt loop
