Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Elisha’s 650b+ all road bike
Chapman Cycles:
Dimple
Chapman Cycles:
I’ve seen headbadges affixed with rivets, drive screws, adhesive, or tiny bolts. I prefer the latter using a couple stainless 4-40 torx screws. Thanks McMaster-Carr. #tap #headbadge #chapmancycles
Chapman Cycles:
Clearcoat is down and smooth on this fillet brazed bottom bracket. #clearcoat #filletbrazed #bottombracket #chapmancycles
Chapman Cycles:
The ISO disc mounts I get only come for straight fork blades and require some blacksmithing to get them to fit properly. Someday I’ll have my own laser cut but until then... #filletbrazing #bicyclebuilding #chapmancycles
Chapman Cycles:
Tinning the top and seat tubes together. Pulling the bronze inside to create a bit of an interior fillet. I build the fillets immediately afterwards. These fillets are already filed and ready for paint! #makingprogress #filletbrazing #bicyclebuilding
Chapman Cycles:
The dropouts on the latest bike are on and cleaned up. Paragon ISO disc dropouts are some of my favorites. Bridges and small braze-ons coming up before paint next week. #dropouts #brazing #chapmancycles
Chapman Cycles:
Some looong chain stay slots for some disc friendly dropouts. Drop bar MTB is coming up now. #chainstays #bicyclebuilding #chapmancycles