©
cdrdwd: The base of the storage box
©
cdrdwd: The rack was easy to assemble and only took a few minutes
©
cdrdwd: 11/32 plywood and FRM 3x each 4x8 foot sheets
©
cdrdwd: The assembled rack ready to be "enhanced"
©
cdrdwd: Finding the actual size of the rack vs advertised. 60" was inside, not outside size
©
cdrdwd: Again checking the size of the rack, 24" was the inside size
©
cdrdwd:
©
cdrdwd:
©
cdrdwd:
©
cdrdwd: Using a clamp to cut the plywood for sizes & back
©
cdrdwd: Laying out the back and sizes and corner supports
©
cdrdwd: Gluing up the back and sides, using temporary boards in front
©
cdrdwd: Back and sides glued (liquid nails) and screwed
©
cdrdwd: Fitting the sides and back onto the rack
©
cdrdwd: Sides and back on the rack ready to secure in place
©
cdrdwd:
©
cdrdwd: back is secured with 2x3 with cutouts for the rack glued and nailed together
©
cdrdwd: Sides have 3/4x3/4 support on top of the rack
©
cdrdwd:
©
cdrdwd: I added 2x4 with cutouts for the rack frame to keep the sides from moving up/down or front to back
©
cdrdwd:
©
cdrdwd:
©
cdrdwd: Securing the 2nd side in place the same as the first
©
cdrdwd: Adding 2x3 supports for the front to mount doors
©
cdrdwd:
©
cdrdwd: Added a 2x4 support between the rack bars to help secure everything
©
cdrdwd: More screwing, gluing and clamping
©
cdrdwd: Test fitting
©
cdrdwd: Test fitting 2.0
©
cdrdwd: laminating the back panel (plywood to FRP)