©
broox: My first kegerator. Bout to be retired
©
broox: First kegerator stickers
©
broox: Kegerator v1
©
broox: New fridge gettin delivered
©
broox: Crappy sketch of my plan
©
broox: Removed the bottom drawers to test fit some kegs. The width was perfect for a couple kegs of homebrew
©
broox: Wide enough for a full size keg as well
©
broox: The part where the compressor sits didn't allow the kegs to sit deep enough for the door to close... I expected this might be an issue
©
broox: Borrowed a buddy's IR camera to try to locate coolant lines. My model seems to have most of the important stuff underneath the unit and only on the freezer side.
©
broox: Cool air blowing from the freezer to the fridge
©
broox: Just piercing the skin before boring all the way through.
©
broox: Decided to move the hole after feeling around through the pilot hole.
©
broox: First hole in
©
broox: This is not sketchy at all
©
broox: Hole #2
©
broox: Holes bored.
©
broox: Holes drilled
©
broox: IR photo of the cool air blowin across the holes from the top
©
broox: IR photo of the cool air blowin across the new holes from inside the unit
©
broox: Cuttin into the wall for the taps
©
broox: Test fittin the keg platform/shelf
©
broox: Insulated tap box
©
broox: Paintin up the shelves and tap box door
©
broox: Temp support for the air ducts
©
broox: Parts all painted up
©
broox: Tap box sealed up and plumbed into the wall
©
broox: Sealed up the ports on the top of the fridge
©
broox: Tap-box mounted and plumbed intot he wall
©
broox: Plumbing cleaned up and test fit
©
broox: Ports in