©
b_light: Raw 2 x 4
©
b_light: Make sure board will fit
©
b_light: Mark off board and enclosure length
©
b_light: Check Component's Height
©
b_light: Cut to Length Using Miter Saw
©
b_light: Cut to Length Using Miter Saw
©
b_light: Counter Sink 4 Screw Hoels
©
b_light: Counter Sink 4 Screw Hoels
©
b_light: Counter Sink 4 Screw Hoels
©
b_light: Counter Sink 4 Screw Hoels
©
b_light: Check for the correct length of screw
©
b_light: Screw Screws Into Place
©
b_light: Cut Off Backing Using Bandsaw
©
b_light: Cut Off Backing Using Bandsaw
©
b_light: Cut Off Backing Using Bandsaw
©
b_light: Cut Off Backing Using Bandsaw
©
b_light: Drill Corners with Forstner Bit
©
b_light: Drill Corners with Forstner Bit
©
b_light: Core Out using Forstner Bit
©
b_light: Cored Out Center
©
b_light: Cored Out 2 by 4 Project Enclosure
©
b_light: Cored Out 2 by 4 Project Enclosure
©
b_light: Cored Out 2 by 4 Project Enclosure
©
b_light: Cored Out 2 by 4 Project Enclosure
©
b_light: Finish with oil or wax or stain or paint
©
b_light: Sand the enclosure
©
b_light: Sand the enclosure
©
b_light: Component Holes Drilled
©
b_light: Enclosures with components
©
b_light: 2x4 Enclosure with Screen