©
Alex1N: The lever for positioning the clamp where I wanted it
©
Alex1N: Another view of the lever
©
Alex1N: Marking in the 60 mm stations and offsets
©
Alex1N: Lots more screws in the re-fastened sheer clamp
©
Alex1N: A couple of my new spring clamps
©
Alex1N: High-density foam paint rollers, 110 mm wide
©
Alex1N: Checking the sheer clamps with the engineer's square
©
Alex1N: View along the sheer, stern to bow
©
Alex1N: Foredeck section of sheer line
©
Alex1N: Pine boards on door "bench"
©
Alex1N: Concrete underlay on next
©
Alex1N: Side panels on "new" bench to test stabilility
©
Alex1N: Side panels stripped back down for cleaning
©
Alex1N: The two side panels clamped up for re-checking
©
Alex1N: Crater rim between on lower piece of timber (cleat)
©
Alex1N: Crater rim under screw head
©
Alex1N: The boat-coating epoxy assemblage
©
Alex1N: 230 mm rollers sawn into 70 mm lengths (approx.)
©
Alex1N: Cookery time :).
©
Alex1N: Results of sieving the high-strength filler powder
©
Alex1N: Squished and unsquished
©
Alex1N: Squished lumps
©
Alex1N: First coat on the bulkheads
©
Alex1N: Bulkheads moved to make way for side panels
©
Alex1N: Setting up for the side panels
©
Alex1N: Bulkhead panels
©
Alex1N: Side panels, second coat
©
Alex1N: Bow transom, third coat
©
Alex1N: Part-sanded bow transom
©
Alex1N: Clogged sandpaper