©
8ran: Home-made cam clamps (for guitar building)
©
8ran: Making Rubber Rope (for guitar building)
©
8ran: Soundboard waiting for rosette inlay
©
8ran: Clamping the rosette into place
©
8ran: Rosette glued and scraped flush
©
8ran: Rosette scraped flush to the soundboard
©
8ran: Top bracing pattern
©
8ran: Gluing on the side kerfing
©
8ran: Gluing down the x-braces
©
8ran: Dovetail neck joint
©
8ran: Top Bracing
©
8ran: Gluing the top on
©
8ran: Top and sides complete
©
8ran: Planing down the zippered back strip
©
8ran: Clamping braces on the back
©
8ran: Gluing the back onto the body
©
8ran: Gluing on the headstock veneer
©
8ran: The body
©
8ran: Cutting the v-slot for the end-stripe
©
8ran: Routing a slot for the end trim
©
8ran: All the channels cut for the binding
©
8ran: Cleaning up the neck while the binding dries
©
8ran: Gluing the fingerboard onto the neck
©
8ran: A temporary spray booth upstairs ;)
©
8ran: Polished vs. unpolished
©
8ran: Everything buffed out
©
8ran: Getting ready to glue the bridge on
©
8ran: Gluing the bridge on
©
8ran: The obligatory armchair shot ;)
©
8ran: Finished peghead back