SewLibra: Burda 6811
SewLibra: The cutting lines are crazy on this pattern.
SewLibra: These lines in the center are marked just like the cutting lines, but don't do it!
SewLibra: This is the way your pattern should look in the fly area after cutting.
SewLibra: Enlarged waist and waistband 1.5 in., lengthened back rise .75 in., cut the leg width down a size on all 3 leg pieces, and added 1.5" for the hem. This pattern is for capris, so it's made for very tall women!
SewLibra: I actually made a muslin this time. I pressed the seams open on this pattern instead of serging them together. Since there are side panels, I wanted all the seams to lie as flat as possible.
SewLibra: I use this old template to trace the topstitching line on the fly. I really should make a better one on of these days!
SewLibra: The fly is traced with disappearing ink and ready to topstitch.
SewLibra: Installing the zipper. This pattern has a flap under one side just like RTW. It takes a little longer, but looks nice!
SewLibra: I had to piece my tricot interfacing to make sure the stretch was in the right direction. Bias cutting takes so much fabric and interfacing!
SewLibra: Clover Chaco Liner is the best thing I've found for marking dark fabrics. This is a bottomweight stretch gabardine from Emma One Sock. Very nice!
SewLibra: Sew the pockets on with a 1/4" SA to keep them from poking out. Sew the side SA at 5/8". It should look like this before you press the seams open.
SewLibra: My nice Emma One Sock fabric had seam show-through after pressing on a scrap, so I knew I would need press cloths to press the seams open.
SewLibra: Using the clear foot with guide on my cover stitch machine. I cover stitched the seams for interest, and to hold down the seam allowances.
SewLibra: And this is why I bought the Janome Coverpro. Look at all that room to the right!
SewLibra: The instructions had the zipper opening on the left, so I reversed the instructions. To avoid confusion, I marked L and R on the fly.
SewLibra: I had to cut the zipper down to 6 inches. I used the button sewing feature on the machine to make a stop at the end.
SewLibra: I had a pucker on at the end of the zip when I sewed it top to bottom. I started over, bottom to top and that worked much better. Had to have all that bulk of fabric to the right though.
SewLibra: I pin right into the ironing board then press the edges, taking out the pins as I go. Especially handy on curves like this waistband.
SewLibra: Using an edge foot to understitch the waistband to the seam allowance.
SewLibra: I like the way the extra underlap for the zipper is on this pattern, just like RTW. Should have placed it a little higher. Some of my serger stitches show.
SewLibra: Inside seams are serged separately, pressed open, then coverstitched on the right side.
SewLibra: Outside seams after coverstitching.
SewLibra: Outside pockets.
SewLibra: Inside pockets.
SewLibra: Front, Burda 6811.
SewLibra: I like the pocket placement in these pants. They are in the forward seam of the panel and stay in place better than side seam pockets.
SewLibra: Front. This was a capri pattern that I added length for pants, but not enough length! I need another inch and a half to wear with other shoes..
SewLibra: I detest how high the waistband is. Ugh.
SewLibra: Boy, this Burda pattern is not a good fit for me. Look at all the under-the-butt wrinkles! Can't deal with this.