Gordon Ewen:
Second fit check
Gordon Ewen:
All cut and ready to glue
Gordon Ewen:
Gluing the 2 font panels
Gordon Ewen:
Bracing panels routed and rounded edges
Gordon Ewen:
Speaker 2
Gordon Ewen:
Speaker 1
Gordon Ewen:
Cut panels first check on fit.
Gordon Ewen:
First 4 panels glued together
Gordon Ewen:
Front panels in primer
Gordon Ewen:
Testing the driver fit
Gordon Ewen:
Dealing with the imperfections on mdf edges
Gordon Ewen:
Speaker one with second coat of sealer
Gordon Ewen:
P1030761
Gordon Ewen:
First look at what it will look like
Gordon Ewen:
Speaker 2 ready for side panel to glued on
Gordon Ewen:
Top, bottom and mid panels glued in place
Gordon Ewen:
Front panels in primer
Gordon Ewen:
First 4 panels glued together
Gordon Ewen:
P1030758
Gordon Ewen:
Speaker 2 side being glued in place
Gordon Ewen:
Maple veneer
Gordon Ewen:
Sp 1 top, and front edges, veneered
Gordon Ewen:
Bitumen damping sheets installed
Gordon Ewen:
Speaker 1 fully veneered and fillets gluEd in
Gordon Ewen:
Sealer applied and sanded-1
Gordon Ewen:
Spraying with lacquer-2
Gordon Ewen:
SBA 3WC Speaker 1, finished!
Gordon Ewen:
SBA 3WC and Illuminator 4
Gordon Ewen:
SBA 3WC
Gordon Ewen:
SBA 3WC v2