nathanfrechen:
Brusher head 5' off ground - bad news bears
nathanfrechen:
Head rotated 180 degrees and strapped to board that acts as a skid plate for rocks, dirt, etc
nathanfrechen:
Three straps to hold - one back against headboard, two down
nathanfrechen:
Chainsaw side board removed - need to choose for either saw or brusher
nathanfrechen:
Clearance for swingarm
nathanfrechen:
460 Fits nicely
nathanfrechen:
Brusher head strapped
nathanfrechen:
Cateye BC110 bottle cage - perfectly snug fit with 32oz MSR fuel bottles, no toe strap needed to hold in place.
nathanfrechen:
V-board
nathanfrechen:
2018-04-30_10-10-55
nathanfrechen:
Bottle cage slighter undersized for 20oz MSR bottle. Toe Strap to hold in place
nathanfrechen:
2018-04-30_10-10-42
nathanfrechen:
Whole trailer is enclosed except for non driveside slot, left open for saw bar or brusher shaft
nathanfrechen:
2018-04-30_10-10-23
nathanfrechen:
Support between driveside sideboard and back V-board.
nathanfrechen:
Clear plastic zip tied in place to protect from mud and rocks
nathanfrechen:
Notch cut into headboard - only needed as I switch between yokes (I have one that will fit a standard 135mm bike, and one that fits my 197mm rear end fatbike). If not changing yokes, not needed. Needed to un-do inner tubes that act as a steering damper (J
nathanfrechen:
Non driveside sideboard
nathanfrechen:
Bottom of BOB
nathanfrechen:
2018-04-30_10-09-21
nathanfrechen:
3 Surly Junk Straps to hold down power tool. 2 layers of 1/2" stall mat to raise up and cushion powerhead.
nathanfrechen:
2018-04-30_10-09-30
nathanfrechen:
Side board that holds saw and protects it
nathanfrechen:
2018-04-30_10-09-14
nathanfrechen:
Strap at front end of tools, to hold down to headboard
nathanfrechen:
V-shape to hold handles securely, just clears 32oz fuel bottles
nathanfrechen:
McLeod head fits into slot in headboard, acts as an anchor for all stick tools. Strap holds everything down, so there are three straps for stick tools in total.
nathanfrechen:
Strap in center of handles
nathanfrechen:
Strap on V-board to hold handles
