JD and Beastlet:
Installed
JD and Beastlet:
Parts for second aileron servo
JD and Beastlet:
20131126_203959.jpg
JD and Beastlet:
20131126_204756.jpg
JD and Beastlet:
20131126_212112.jpg
JD and Beastlet:
Gluing up the longitudinal brace
JD and Beastlet:
Sheeting on top of lateral brace
JD and Beastlet:
Longitudinal brace glued in
JD and Beastlet:
Marking the servo mounting holes
JD and Beastlet:
Servo mounting holes marked
JD and Beastlet:
Time for my trusty pin vise
JD and Beastlet:
Holes drilled, threading with servo screw
JD and Beastlet:
String tied to servo lead
JD and Beastlet:
Fishing wire
JD and Beastlet:
Going fishing
JD and Beastlet:
Fishing wire in the servo bay
JD and Beastlet:
Fishing wire tied to string
JD and Beastlet:
String through wing
JD and Beastlet:
String pulled through wing
JD and Beastlet:
Wing on plane to determine servo lead length
JD and Beastlet:
Required length marked on string
JD and Beastlet:
Measuring the length of the required splice (~16")
JD and Beastlet:
Tools and supplies for splicing
JD and Beastlet:
Measuring the extension
JD and Beastlet:
16" extension
JD and Beastlet:
Cut extension to length
JD and Beastlet:
Three conductors
JD and Beastlet:
Three stripped ends
JD and Beastlet:
Exposed wire, now twisted
JD and Beastlet:
Dip twisted ends into flux
