nelson.kamo83:
Time to fix the dryer...again!
nelson.kamo83:
Time to trash the laundry room
nelson.kamo83:
This thing is 220 Volts and Amps up the whazoo
nelson.kamo83:
iiiiiUNPLUG THE ELECTRICITY!!!!!!
nelson.kamo83:
Pull it out a short way...at 1st
nelson.kamo83:
The "trick" to opening (most) dryers
nelson.kamo83:
There are 2 spring clips in the front.
nelson.kamo83:
Pull up
nelson.kamo83:
Push in-Pull up
nelson.kamo83:
The belt (should) go around the tub
nelson.kamo83:
Yep!! It's Broken
nelson.kamo83:
The broken 3 groove belt
nelson.kamo83:
My frustration
nelson.kamo83:
The NEW $14, 4 groove belt
nelson.kamo83:
Pull it out as far as you can.
nelson.kamo83:
The back panel(s) must come off
nelson.kamo83:
Mine has 11 or so screws on the back cover alone
nelson.kamo83:
Be sure to only remove the screws holding the back sheet metal on.
nelson.kamo83:
The back of the tub must come off completely
nelson.kamo83:
Hang the tub from the frame of the dryer
nelson.kamo83:
There are SHARP EDGES EVERYWHERE!!!!
nelson.kamo83:
The back of the tub(plenum), off the machine
nelson.kamo83:
The tube containing the heating element
nelson.kamo83:
A better shot of the Heating element tube
nelson.kamo83:
The snake's nest that is the heating element
nelson.kamo83:
Another shot of the heat element
nelson.kamo83:
This is how I found it
nelson.kamo83:
A better shot of the belt tensioner spring
nelson.kamo83:
The 4 groove pulley (from inside the dryer)
nelson.kamo83:
The belt on and ready to test
